Product Overview:
The crawler brush chipper is an all-terrain outdoor green waste processing equipment. Equipped with a cross-country crawler chassis, it adapts to muddy, rugged, sloped and complex road conditions. It can work on-site without trailer transportation, widely used in forest orchards, mountain green belts, municipal landscaping and rural environmental governance for on-site crushing of various green wastes.
Core Product Advantages:
- 1.Cross-country Crawler Chassis, Full-terrain Operation.
Thickened wear-resistant crawler design with strong trafficability, anti-slip performance and stable climbing and obstacle-crossing capability. It supports in-situ steering and flexible shuttle in narrow and complex sites, completely free from terrain and road restrictions.
- 2.Powerful Diesel Power, Wet & Dry Universal
High-torque diesel power unit with sufficient power reserve and low fuel consumption. It supports long-term high-load operation, capable of crushing dry wood, fresh branches, soft vines and hard miscellaneous wood in one pass without stalling or clogging.
- 3.Hydraulic Automatic Feeding, Labor-saving & Efficient
Full hydraulic adjustable-speed automatic feeding system eliminates manual feeding. The widened feeding inlet increases feeding capacity. High-hardness alloy cutter roller ensures uniform crushing, compressing waste volume by 90% to save transportation and stacking space.
- 4.Intelligent Anti-clog Protection, Low Failure Rate
Built-in overload protection and automatic reverse feeding function to avoid jamming and equipment damage. Thickened steel plate integrated welding body is shock-resistant and wear-resistant, adapting to long-term outdoor high-strength working conditions.
- 5.Waste Recycling, Cost Reduction & Income Increase
Crushed wood chips can be used for garden mulching, organic fertilizer raw materials, edible fungus medium and biomass fuel. It realizes on-site reduction and recycling of green waste, reducing processing costs and creating additional benefits.
| Model(Width*Length) |
GX1.5-6-4 |
GX2-8-4 |
GX2-9-4 |
GX2-10-4 |
GX2-12-4 |
| Layers |
4 |
| Drying area(㎡) |
29 |
45 |
51 |
57 |
69 |
| Spread thickness of material(mm) |
50-200 |
| Working temperature(℃) |
0-120 |
| Drying time(hour) |
0.1-5 |
| Capacity(t/h) |
100-150kg/h |
200kg/h |
250kg/h |
300kg/h |
400kg/h |
| heat exchange furnace(M) |
3.2*1*2.7 |
3.9*1.26*3 |
3.9*1.26*3 |
4.7*1.5*3 |
4.7*1.5*3 |
| Induced draft fan(kw) |
11 |
15 |
15 |
22 |
22 |
| Exhaust fan(kw) |
1.5 |
2.2 |
| Feeding conveyor(kw) |
1.5 |
2.2 |
2.2 |
2.2 |
3 |
| Discharge conveyor(kw) |
0.55 |
| Total power(kw) |
14.55 |
19.25 |
19.95 |
26.95 |
27.75 |
| LP gas consumption (90 degree fanrenheit) |
20m³/H |
25m³/H |
28m³/H |
30m³/H |
36m³/h |
| Electricity consumption |
25kwh |
30kwh |
35kwh |
40kwh |
45kwh |
| Place requirement (W*L*H)M |
4.5*14*2.7 |
5*19*2.8 |
4.5*20*2.8 |
5.5*21*2.8 |
5.5*23*2.8 |
Send message to this supplier
